24 core fiber optic cable figure8 gytc8s outdoor single mode cables
Description of 24 core fiber optic cable figure8 gytc8s outdoor
single mode cables
* Loose tube style, figure-8 optical fiber cable, Jelly compound,
optical fiber cable with metallic central strength member of steel
wire.
* Filling compound and water-proof tape armored with corrugated
steel tape/AL incorporation steel messenger wire suitable for
overhead installation as pole to pole or pole to premises.
Features of of 24 core fiber optic cable figure8 gytc8s outdoor
single mode cables
* High strength, tracking-resistant sheath.
* GYXTC8S cable is accompanied with the stranded wires as the
supporting part to be figure-8 structure.
* 250μm fibers are positioned into a loose tube made of high
modulus plastics on the central of cable.
* The tube is filled with a water-resistant filling compound.
* Then the tube is surrounded with aramid yarn to ensure the high
tensile strength.
* After that the cable is covered with thin PE (polyethylene)
sheath.
Parameter Data
Fiber Num. | Outer diameter (mm) | Weight (kg/km) | Tension (N) | Crash loading(N/100mm) |
Short term | Long term | Short term | Long term |
2-30 | 9.5*18.2 | 150 | ≥6000 | ≥2000 | ≥1000 | ≥300 |
32-48 | 10.2*18.9 | 162 |
50-60 | 10.2*19.2 | 173 |
62-72 | 10.9*19.9 | 197 |
74-84 | 12.1*21.1 | 217 |
86-96 | 12.1*21.1 | 217 |
1,High tensile strength of stranded wires meet the requirement of
self-supporting and reduce the installation cost.
2,Good mechanical and temperature performance
3,High strength loose tube that is hydrolysis resistant
4,Special tube filling compound ensure a critical protection of
fiber
5,Loose tube filling compound
6,Aramid Yarn Provide additional mechanical protection
7,Loose tube filling compound
8,100% cable core filling
G.652D Single Mode Optical Fiber (B1.3) |
| | |
| | | |
| | |
| | |
| | |
| | | |
| | |
| | |
Zero-dispersion wavelength | | |
| | |
| PMD single fiber | | |
PMD Q links | | |
| 1310nm | | |
| | |
| | |
Core-cladding concentricity error | | |
| | |
Cladding/coating concentricity error | | |
| | |
Macrobend attenuation (ф 50mm, 100 cycles) | | | |
| | |
Bending radius | | |
Dynamic fatigue parameters | | |
Additional Attenuation @1310nm & @1550nm | Temperature cycling test:
(-60℃～85℃, 3 cycles) | | |
Water soak test:
(23℃ for 30 days) | | |
Damp heat test:
(85℃, 85%RH for 30 days) | | |
Thermal aging test (85℃ for 30 days) | | |
Warm water soak test: (60℃ for 15 days) | | |
Drawings of 24 core fiber optic cable figure8 gytc8s outdoor single
mode cables
You may also like
